How to Change the Belt on a Bissell Cleanview Vacuum

Sarah Taylor

Updated on:

How to Change the Belt on a Bissell Cleanview Vacuum

Introducing a new belt to your Bissell Cleanview Vacuum is a relatively simple process that can greatly improve its cleaning performance. In this guide, we will walk you through the step-by-step procedure to change the belt on your Bissell Cleanview vacuum. By following these instructions, you can keep your Bissell Cleanview Vacuum working efficiently and effectively. So, let’s get started and learn how to change the belt on your Bissell Cleanview Vacuum.

How to Change the Belt on a Bissell Cleanview Vacuum

Credit: www.amazon.com

Changing The Belt On Bissell Cleanview

Are you experiencing reduced suction or brush roll malfunction with your Bissell Cleanview vacuum? These are signs of a worn-out belt. Changing the belt can be a simple and cost-effective solution to restore optimal performance.

To begin, gather the necessary tools and preparations. You will need a screwdriver, new replacement belt compatible with your Cleanview model, and a clean surface to work on. Be sure to unplug the vacuum before proceeding.

Steps:

  1. Turn your vacuum upside down to access the bottom plate.
  2. Using a screwdriver, remove the screws securing the bottom plate.
  3. Take out the bottom plate to expose the brush roll and belt.
  4. Inspect the belt for signs of damage or wear, such as fraying or stretching.
  5. If necessary, release the tension on the belt by adjusting the brush roll position.
  6. Remove the old belt from the motor spindle and brush roll.
  7. Safely dispose of the old belt.
  8. Position the new belt onto the motor spindle and brush roll.
  9. Ensure the belt is properly aligned and not twisted.
  10. Replace the bottom plate and secure it with the screws.
  11. Plug in the vacuum and test the brush roll for smooth rotation.

By following these simple steps, you can easily change the belt on your Bissell Cleanview vacuum. Remember to consult your vacuum’s user manual for model-specific instructions or seek professional assistance if needed. Regularly replacing the belt will help keep your vacuum performing at its best.

Step-by-step Belt Replacement Guide

Changing the belt on a Bissell Cleanview Vacuum is a simple process that can help maintain its efficiency and prolong its lifespan. Before starting, make sure to unplug the vacuum and position it on a flat surface.

Steps Action
Step 1 Remove the bottom cover
Step 2 Detach the old belt
Step 3 Attach the new belt properly

Start by removing the bottom cover of the vacuum. This can usually be done by flipping the vacuum over and locating the screws or tabs that secure the cover. Use a screwdriver or your hands to remove the screws or release the tabs, allowing you to easily lift off the cover.

Next, carefully detach the old belt from the vacuum’s brush roll. This can usually be done by pulling it off or releasing a tensioner. Take note of how the old belt is positioned before removing it, as this will make it easier to attach the new belt.

Finally, attach the new belt properly by positioning it around the brush roll and the motor shaft. Make sure the belt is securely in place and properly aligned. Once the new belt is attached, you can replace the bottom cover, securing it with the screws or tabs.

By following these simple steps, you can easily replace the belt on your Bissell Cleanview Vacuum and ensure its optimal performance.

Troubleshooting Belt Change Issues

To change the belt on a Bissell Cleanview Vacuum, it’s important to troubleshoot any related issues that may arise. One common problem is the incorrect alignment of the brush roll. Ensure that the brush roll is in the correct position and properly aligned with the vacuum. Another issue to be aware of is having a belt that is too tight. Make sure the belt is not overly tight, as this can cause strain on the motor and lead to malfunctions. If you follow these troubleshooting steps and the vacuum still malfunctions, it may be necessary to seek further assistance or consult the user manual for additional guidance.

Maintaining Your Bissell Cleanview

Maintain your Bissell Cleanview vacuum effortlessly by learning how to change the belt. Keep your vacuum operating at peak performance with this simple and essential maintenance step.

Frequency of belt checks and replacement Tips to extend the belt’s life Additional maintenance recommendations
Regularly inspect the belt for signs of wear and tear.
Replace the belt if it is stretched or has cracks.
– Avoid vacuuming large debris or foreign objects.
– Clean the brush roll regularly to prevent belt strain.
– Ensure the belt is properly aligned and tensioned.
– Store the vacuum in a clean and dry area.
– Clean the filters regularly to maintain suction power.
– Check and empty the dirt container when full.
– Clean the vacuum’s nozzle and attachments.
– Use the vacuum according to the manufacturer’s instructions.

Frequently Asked Questions On How To Change The Belt On A Bissell Cleanview Vacuum

Why Is My Cleanview Vacuum Brush Not Spinning?

The brush on your Cleanview vacuum may not be spinning if it’s clogged or if the belt is worn out. Check for any debris tangled in the brush and replace the belt if necessary. This can help restore the brush’s spinning function.

How Do I Know If My Vacuum Belt Needs New?

To determine if your vacuum belt needs replacing, inspect it for signs of damage, such as wearing or fraying. Check the belt’s tension by rotating the brush roll manually. If the belt feels loose or slips, it’s time for a new one.

Regular belt maintenance ensures optimal vacuum performance.

How Do You Change A Bissell Brush Belt?

To change a Bissell brush belt, follow these steps: 1. Unplug the vacuum and lay it on its back. 2. Remove the bottom plate by unscrewing or releasing the clips. 3. Take out the old belt and slide the new one onto the motor pulley.

4. Thread the other end of the belt onto the brush roll. 5. Reattach the bottom plate and test the vacuum before use.

How Do You Put A Bissell Cleanview Back Together?

To put a Bissell Cleanview back together, follow these simple steps: 1) Gather all the parts and components. 2) Refer to the instruction manual for guidance. 3) Start by attaching the various sections and pieces together. 4) Ensure a secure fit and tighten any screws or fastenings.

5) Test the device to ensure everything is functioning properly.

Conclusion

To sum up, changing the belt on a Bissell Cleanview Vacuum is a simple process that can greatly improve the performance and longevity of your vacuum cleaner. By following the step-by-step instructions provided in this blog post, you can easily replace the belt and keep your vacuum running smoothly.

Remember to regularly check and replace the belt as needed to ensure optimal cleaning power. Happy vacuuming!

 

Leave a Comment