Vacuum belt is an important essential attachment of the vacuum cleaners. It is generally on the brushroll area that connects the brushroll to the motor to create power for spinning the brushroll faster. Breaking and replacing the vacuum belt every now and then is a common issue. You can replace the belt easily yourself without any hassle. Let’s know about Dirt Devil Vacuum first then we will deep dive into the discussion of how to replace a Dirt Devil vacuum belt
Dirt Devil Vacuum
Dirt Devil is an affordable and innovative cleaning brand in the markets. Dirt Devil brought a variety of vacuum cleaners around the last 25 years. It exists with a variety of models of versatile, upright, stick, handheld, steam, pet, and carpet cleaning effective tools for quick, easy, smart, and powerful cleaning. This cleaning brand is especially famous for their carpet cleaning vacuums at affordable prices.This brand’s different models exist with the necessary attachments and technology like- filter, battery, trash box, brush roller, belt, pet cleaning tools, etc.
The vacuums normally need proper maintenance and emptying the bag or canister after cleaning. Avoiding excess use helps to make your device more long lasting instead of existing lasting time. You may face some common issues while using your device. Sometimes they may also malfunction.
What Is A Vacuum Belt?
Vacuum cleaners exist with a variety of common attachments. Vacuum belt is one of them. It is made with rubber and affixed with the brushroll. It helps to spin the brushroll quickly to pick up embedded dirt, dust, stain, and carpet fiber from different household objects surfaces. It stretches and loses its elasticity during operation. Sometimes the belt may break. Fixing and replacing the belt is easy using only simple tools like-screwdriver.
How Will You Know That Your Vacuum Belt Is Bad?
Your gadget is cleaning your home while you are playing with your kids. It is cleaning your floor’s surfaces. You noticed that it can’t pick up all the trash properly. The brush surface can’t pick up trash from your carpet or the carpet’s fiber. The brushroll can’t spin fast. It is spinning slowly. Suddenly it stopped. You fixs a schedule for cleaning your carpet using your vacuum. The next morning you pressed the turn on button at 8 a.m. But the machine did not start. You need to check the machine to identify the problem. You can identify in the following ways that your vacuum cleaner’s belt is harmed badly.
- When you smell something burning while cleaning.
- If you smell any rubber burning.
- When your vacuum overheats the rubber belt melts.
- The motor can’t provide enough suction power for deep cleaning.
- Vacuum’s performance is seen as low.
- Your vacuum’s brush roll may spin slowly.
- Suddenly the brushroll spins stop.
- The brush head can’t pick up all the trash and fiber from your carpet.
- Rubber belt is stretched and loosen by losing its elasticity.
- The belt slips from its position.
- Maybe the belt broke badly.
- Your vacuum’s belt has not been checked to last 18 months after replacing it.
When you find any of these problems, you can replace them rapidly. You can repair or replace your vacuum’s breaking belt without emptying your wallet. For this, you need to check the vacuum’s belt every month.
Dirt Devil Vacuum Belt Replacing Guides: Step By Step
Dirt Devil Vacuum belt replacing is very simple. If you face any trouble, first unplug the machine from its power connection. Check the issue and solve it after finding the problem. Make sure the trash box has no issue. Then check the vacuum’s belt and replace it again step by step. They are-
- Collect the repair tools like- a screwdriverhttps://dirtdevil.com/pages/abou, a new belt, and hand gloves.
- Make sure that you purchase the appropriate belt according to the belt size, style, and on the model of your vacuum.
- Unplug the vacuum from the cleaner. It can ensure your safety while replacing the new one.
- Put the vacuum’s handle on the ground to open the brushroll and nozzle.
- Remove the screw of the brushroll area and pull the brush roll and nozzle out from inside the vacuum.
- Remove the old belt that was wrapped around the motor shaft and the brushroll. You can use your fingers or a screwdriver to remove it.
- Replace the new belt in the same location and in the same way of the old belt. Make sure that the new belt is replaced in the correct position. Try to avoid too much stretching while the new belt is replaced. Too much stretches may create a chance to loosen and harm your new belt.
- Cover the brushroll and secure it by tightening the screws. The new belt set up is done correctly.
- Plug the vacuum again and turn it for testing. Turn on/off 2-3 times. If it turns on/off correctly the vacuum is ready to work again.
- You should check your new belt once a week. You have to storing it accurately. It will help to make your vacuum last longer.
- If you can’t succeed in replacing the new belt yourself, hire a professional qualified repair technician.
- You can take your replacement warranty facility showing your purchase money receipt or warranty card.
Conclusion
It is important to find the actual problem. It will be easy to solve the problem instantly and quickly if you identify the correct issue. You have to clean the brushroll regularly. Wrapping too much long hair may damage your vacuum’s belt quickly. If the belt is damaged again and again, you may take a new device.
Frequently Asked Questions About How To Replace A Dirt Devil Vacuum Belt
How often should you change your vacuum belt?
You should replace the belts on your vacuum at least every three to six months if the vacuum is regularly used. This is very important for proper cleaning. But you can make it longer by using it twice or thrice a week.
Are belts easy to replace?
Vacuum belt replacement is easy because today’s automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning. Just need to rotate the tensioner, remove the old belt and install a new one.
How does a vacuum belt work?
Vacuum belts work to spin a vacuum’s brush roller and/or, on some self-propelled models, to turn a vacuum’s wheels. Whatever the style of vacuum, this repair will take place in the machine’s brushroll area.
Why do vacuum belts break?
Often, a belt breaks because the machine is running over the edge of a rug or other thick items, perhaps even the vacuum cord. This causes “snagging.” When this happens, the belt becomes stuck and usually overheats. Unfortunately, this results in immediate breakage.
What causes belt damage?
If a belt is not tensioned properly, it will ride too loose or too tight on the pulley. A belt that’s too loose on a pulley will cause slippage, which leads to heat build up from friction. This heat will damage your rubber belts and cause the belts to crack and break.

Hi, I’m Sarah Taylor. Welcome to my Knowledge heaven. I am Cleaning Expert and here I share the experiences I gathered over the last couple of years about cleaning and hygiene.